# Firecracker connection logging

**URL:** <https://forum.opennebula.io/t/firecracker-connection-logging/10018>\
**Category:** Installation & Configuration\
**Created:** [October 12, 2021, 4:47am UTC](https://forum.opennebula.io/t/firecracker-connection-logging/10018 "2021-10-12T04:47:35Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![nicpon](https://yyz1.discourse-cdn.com/flex031/user_avatar/forum.opennebula.io/nicpon/32/4942_2.png) [@nicpon](https://forum.opennebula.io/u/nicpon)\
**Post date:** [October 12, 2021, 4:47am UTC](https://forum.opennebula.io/t/firecracker-connection-logging/10018/1 "2021-10-12T04:47:35Z")

</div>

Hello, i went through deployment of firecracker node as per documentation for 6.0. Its a simple 1 node deployment. Ssh connection back and forth works without issues, firewall disabled and all packages deployed as per docs. However, my host is in err status and doesn’t connect. Can i enable some driver specific logging to see what is happening? What are the troubleshooting steps for the host connectivity/setup that you would recommend i check?

---

<div class="post-metadata">

**Author:** ![ruben](https://yyz1.discourse-cdn.com/flex031/user_avatar/forum.opennebula.io/ruben/32/19_2.png) [@ruben](https://forum.opennebula.io/u/ruben)\
**Post date:** [October 13, 2021, 8:23am UTC](https://forum.opennebula.io/t/firecracker-connection-logging/10018/2 "2021-10-13T08:23:10Z")

</div>

Are there any relevant messages in oned.log or monitord.log. Also you can start monitord with increased verbosity in monitord.conf [1,2]

[1] [Monitoring Configuration — OpenNebula 6.0.3 documentation](https://docs.opennebula.io/6.0/installation_and_configuration/opennebula_services/monitoring.html#service-control-and-logs)  
[2] [Monitoring Configuration — OpenNebula 6.0.3 documentation](https://docs.opennebula.io/6.0/installation_and_configuration/opennebula_services/monitoring.html#configuration)