# Where can set MONITORING\_INTERVAL\_HOST?

**URL:** <https://forum.opennebula.io/t/where-can-set-monitoring-interval-host/9322>\
**Category:** Product Support\
**Created:** [March 23, 2021, 10:33am UTC](https://forum.opennebula.io/t/where-can-set-monitoring-interval-host/9322 "2021-03-23T10:33:36Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![perrfect](https://avatars.discourse-cdn.com/v4/letter/p/45deac/32.png) [@perrfect](https://forum.opennebula.io/u/perrfect)\
**Post date:** [March 23, 2021, 10:33am UTC](https://forum.opennebula.io/t/where-can-set-monitoring-interval-host/9322/1 "2021-03-23T10:33:36Z")

</div>

Hello.  
I need some help with MONITORING\_INTERVAL\_HOST and HOST\_HOOK.  
I’m testing host\_hook when one of my kvm-node is down.  
I stop a libvirtd service and want that my VMs migrate to another kvm-node.  
When i stop the libvirtd service my VMs go to the state: POWEROFF and after some time in the logs i see a massage that my KVM-node not available and then only hook started.  
In the version 5.10 when one kvm-node was not avaliable, VMs at once migrate to another kvm-node, but in the version 5.12 host\_hook works differently.  
How can decide the problem and monitoring state my kvm-node every minute or more often?

---

<div class="post-metadata">

**Author:** ![atodorov\_storpool](https://yyz1.discourse-cdn.com/flex031/user_avatar/forum.opennebula.io/atodorov_storpool/32/5327_2.png) [@atodorov\_storpool](https://forum.opennebula.io/u/atodorov_storpool)\
**Post date:** [March 24, 2021, 5:47am UTC](https://forum.opennebula.io/t/where-can-set-monitoring-interval-host/9322/2 "2021-03-24T05:47:36Z")

</div>

Hello,

Did you check the monitord configuration variables in _/etc/one/monitord.conf_?

Best Regards,  
Anton Todorov

---

<div class="post-metadata">

**Author:** ![perrfect](https://avatars.discourse-cdn.com/v4/letter/p/45deac/32.png) [@perrfect](https://forum.opennebula.io/u/perrfect)\
**Post date:** [March 24, 2021, 7:57am UTC](https://forum.opennebula.io/t/where-can-set-monitoring-interval-host/9322/3 "2021-03-24T07:57:13Z")

</div>

Thank you for your reply.  
I found MONITORING\_INTERVAL in this configuration file.  
Then i have one question where can i set interval to start a host\_hook?

---

<div class="post-metadata">

**Author:** ![atodorov\_storpool](https://yyz1.discourse-cdn.com/flex031/user_avatar/forum.opennebula.io/atodorov_storpool/32/5327_2.png) [@atodorov\_storpool](https://forum.opennebula.io/u/atodorov_storpool)\
**Post date:** [March 24, 2021, 9:26am UTC](https://forum.opennebula.io/t/where-can-set-monitoring-interval-host/9322/4 "2021-03-24T09:26:21Z")

</div>

You should take a look at the _Avoid Trensient_("-p") argument in the host hook configuration on [host failure](http://docs.opennebula.io/5.12/advanced_components/ha/ftguide.html#host-failures)

Best Regards,  
Anton Todorov

---

<div class="post-metadata">

**Author:** ![perrfect](https://avatars.discourse-cdn.com/v4/letter/p/45deac/32.png) [@perrfect](https://forum.opennebula.io/u/perrfect)\
**Post date:** [March 24, 2021, 9:31am UTC](https://forum.opennebula.io/t/where-can-set-monitoring-interval-host/9322/5 "2021-03-24T09:31:09Z")

</div>

> [@atodorov\_storpool](#):
>
> You should take a look at the _Avoid Trensient_ (“-p”) argument in the host hook configuration on [host failure](http://docs.opennebula.io/5.12/advanced_components/ha/ftguide.html#host-failures)

Thank you so much